
U-Boot SPL 2018.01-g313dcd69c2 (Dec 16 2018 - 05:23:30)
SYSFW ABI: 2.5 (firmware rev 0x0012 '18.10.0-v2018.10 (Curious Crow)')
Trying to boot from MMC2
Starting ATF on ARM64 core...

NOTICE:  BL31: v1.5(release):ti2018.04-rc1
NOTICE:  BL31: Built : 04:37:22, Dec 16 2018
I/TC:
I/TC: OP-TEE version: 3.2.0-81-g48952f9-dev #1 Sun Dec 16 05:14:09 UTC 2018 aarch64
I/TC: Initialized

U-Boot SPL 2018.01-g313dcd69c2 (Dec 16 2018 - 05:15:53)
Trying to boot from MMC2


U-Boot 2018.01-g313dcd69c2 (Dec 16 2018 - 05:15:53 +0000)

Model: Texas Instruments AM654 Base Board
DRAM:  4 GiB
MMC:   sdhci@0: 0, sdhci@0: 1
In:    serial@2800000
Out:   serial@2800000
Err:   serial@2800000
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
detected AM6-IDKAPPEVM
detected SER-PCIE2LEVM
Net:   eth0: cpsw_nuss@046000000
Hit any key to stop autoboot:  0
=>
=> setenv name_overlays k3-am654-pcie-usb3.dtbo k3-am654-evm-csi2-ov490.dtbo k3-am654-evm-oldi-lcd1evm.dtbo
=> saveenv
Saving Environment to MMC...
Writing to redundant MMC(0)... done
=>
=> boot
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid GPT ***
GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
part_get_info_efi: *** ERROR: Invalid Backup GPT ***
bad MBR sector signature 0x0000
switch to partitions #0, OK
mmc1 is current device
SD/MMC found on device 1
** Unable to read file boot.scr **
1011 bytes read in 12 ms (82 KiB/s)
Loaded env from uEnv.txt
Importing environment from mmc1 ...
Running uenvcmd ...
Using board_name = am65x
11685896 bytes read in 1027 ms (10.9 MiB/s)
59900 bytes read in 18 ms (3.2 MiB/s)
534 bytes read in 8 ms (64.5 KiB/s)
1472 bytes read in 12 ms (119.1 KiB/s)
2244 bytes read in 9 ms (243.2 KiB/s)
## Flattened Device Tree blob at 82000000
   Booting using the fdt blob at 0x82000000
   reserving fdt memory region: addr=82000000 size=10f000
   Loading Device Tree to 00000000fddb2000, end 00000000fdec3fff ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.79-gbde58ab01e (oe-user@oe-host) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #1 SMP PREEMPT Thu Dec 20 03:19:19 UTC 2018
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Machine model: Texas Instruments AM654 Base Board
[    0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[    0.000000] bootconsole [ns16550a0] enabled
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009b000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node r5f1-dma-memory@9b000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009b100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node r5f1-memory@9b100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009c000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node r5f0-dma-memory@9c000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009c100000, size 7 MiB
[    0.000000] OF: reserved mem: initialized node r5f0-memory@9c100000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 512 MiB at 0x00000000c0000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 2 pages/cpu @ffff80087feb0000 s38936 r8192 d83944 u131072
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64704
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=47040000.ospi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),-@8m(ospi.rootfs) root=PARTUUID=0009559b-02 rw rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes)
[    0.000000] software IO TLB [mem 0xf9db0000-0xfddb0000] (64MB) mapped at [ffff800079db0000-ffff80007ddaffff]
[    0.000000] Memory: 3529664K/4145152K available (7422K kernel code, 660K rwdata, 2816K rodata, 448K init, 654K bss, 91200K reserved, 524288K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7bdfffff0000   (126847 GB)
[    0.000000]       .text : 0xffff000008080000 - 0xffff0000087c0000   (  7424 KB)
[    0.000000]     .rodata : 0xffff0000087c0000 - 0xffff000008a90000   (  2880 KB)
[    0.000000]       .init : 0xffff000008a90000 - 0xffff000008b00000   (   448 KB)
[    0.000000]       .data : 0xffff000008b00000 - 0xffff000008ba5008   (   661 KB)
[    0.000000]        .bss : 0xffff000008ba5008 - 0xffff000008c48a60   (   655 KB)
[    0.000000]     fixed   : 0xffff7fdffe7b0000 - 0xffff7fdffec00000   (  4416 KB)
[    0.000000]     PCI I/O : 0xffff7fdffee00000 - 0xffff7fdfffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffff7fe000000000 - 0xffff800000000000   (   128 GB maximum)
[    0.000000]               0xffff7fe000000000 - 0xffff7fe002200000   (    34 MB actual)
[    0.000000]     memory  : 0xffff800000000000 - 0xffff800880000000   ( 34816 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] ITS [mem 0x01820000-0x0182ffff]
[    0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[    0.000000] ITS@0x0000000001820000: allocated 1048576 Devices @8c0800000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000008c00b0000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
[    0.000000] CPU0: using LPI pending table @0x00000008c00c0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[    0.000005] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[    0.008618] Console: colour dummy device 80x25
[    0.013201] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[    0.023888] pid_max: default: 32768 minimum: 301
[    0.028741] Security Framework initialized
[    0.033000] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes)
[    0.039879] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes)
[    0.063292] ASID allocator initialised with 32768 entries
[    0.068931] Hierarchical SRCU implementation.
[    0.081493] PCI/MSI: /soc0/interrupt-controller@1800000/gic-its@1000000 domain created
[    0.089884] Platform MSI: /soc0/interrupt-controller@1800000/gic-its@1000000 domain created
[    0.106467] smp: Bringing up secondary CPUs ...
[    0.139603] Detected VIPT I-cache on CPU1
[    0.139641] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
[    0.139688] CPU1: using LPI pending table @0x00000008c0360000
[    0.139734] CPU1: Booted secondary processor [410fd034]
[    0.196620] Detected VIPT I-cache on CPU2
[    0.196660] GICv3: CPU2: found redistributor 100 region 0:0x00000000018c0000
[    0.196711] CPU2: using LPI pending table @0x00000008c03d0000
[    0.196760] CPU2: Booted secondary processor [410fd034]
[    0.225030] Detected VIPT I-cache on CPU3
[    0.225058] GICv3: CPU3: found redistributor 101 region 0:0x00000000018e0000
[    0.225103] CPU3: using LPI pending table @0x00000008c0430000
[    0.225132] CPU3: Booted secondary processor [410fd034]
[    0.225264] smp: Brought up 1 node, 4 CPUs
[    0.296923] SMP: Total of 4 processors activated.
[    0.301740] CPU features: detected feature: GIC system register CPU interface
[    0.309042] CPU features: detected feature: 32-bit EL0 Support
[    0.315013] CPU features: detected feature: Kernel page table isolation (KPTI)
[    0.346322] CPU: All CPU(s) started at EL2
[    0.350540] alternatives: patching kernel code
[    0.356509] devtmpfs: initialized
[    0.369149] random: get_random_u32 called from bucket_table_alloc+0x108/0x258 with crng_init=0
[    0.378765] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.388760] futex hash table entries: 1024 (order: 1, 131072 bytes)
[    0.396590] pinctrl core: initialized pinctrl subsystem
[    0.402570] NET: Registered protocol family 16
[    0.409096] vdso: 2 pages (1 code @ ffff0000087d0000, 1 data @ ffff000008b20000)
[    0.422863] DMA: preallocated 256 KiB pool for atomic allocations
[    0.433437] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517
[    0.440602] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517
[    0.447730] davinci_gpio 42110000.: IRQ not populated, err = -517
[    0.465502] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.472384] HugeTLB registered 512 MiB page size, pre-allocated 0 pages
[    0.481674] omap_i2c 42120000.i2c: could not find pctldev for node /soc0/pinmux@4301c000/wkup_i2c0_pins_default, deferring probe
[    0.493589] omap_i2c 40b00000.i2c: could not find pctldev for node /soc0/pinmux@4301c000/mcu_i2c0_pins_default, deferring probe
[    0.505368] omap_i2c 2000000.i2c: could not find pctldev for node /soc0/pinmux@11c2e8/main_i2c0_pins_default, deferring probe
[    0.516968] omap_i2c 2010000.i2c: could not find pctldev for node /soc0/pinmux@11c2e8/main_i2c1_pins_default, deferring probe
[    0.528565] omap_i2c 2020000.i2c: could not find pctldev for node /soc0/pinmux@11c000/main_i2c2_pins_default, deferring probe
[    0.540270] media: Linux media interface: v0.10
[    0.544933] Linux video capture interface: v2.00
[    0.549697] pps_core: LinuxPPS API ver. 1 registered
[    0.554777] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.564135] PTP clock support registered
[    0.568171] EDAC MC: Ver: 3.0.0
[    0.572285] Advanced Linux Sound Architecture Driver Initialized.
[    0.579256] clocksource: Switched to clocksource arch_sys_counter
[    0.585676] VFS: Disk quotas dquot_6.6.0
[    0.589803] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
[    0.603805] NET: Registered protocol family 2
[    0.608799] TCP established hash table entries: 32768 (order: 2, 262144 bytes)
[    0.616509] TCP bind hash table entries: 32768 (order: 3, 524288 bytes)
[    0.623856] TCP: Hash tables configured (established 32768 bind 32768)
[    0.630691] UDP hash table entries: 2048 (order: 0, 65536 bytes)
[    0.636958] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
[    0.643824] NET: Registered protocol family 1
[    0.648778] RPC: Registered named UNIX socket transport module.
[    0.654856] RPC: Registered udp transport module.
[    0.659670] RPC: Registered tcp transport module.
[    0.664484] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.676223] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    0.688085] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.694644] NFS: Registering the id_resolver key type
[    0.699896] Key type id_resolver registered
[    0.704187] Key type id_legacy registered
[    0.708303] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.715400] 9p: Installing v9fs 9p2000 file system support
[    0.725249] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.732845] io scheduler noop registered
[    0.736980] io scheduler cfq registered (default)
[    0.741805] io scheduler mq-deadline registered
[    0.746444] io scheduler kyber registered
[    0.752697] pinctrl-single 11c000.pinmux: 185 pins at pa ffff000009bcc000 size 740
[    0.760597] pinctrl-single 11c2e8.pinmux: 9 pins at pa ffff000009bec2e8 size 36
[    0.768307] pinctrl-single 4301c000.pinmux: 70 pins at pa ffff000009c0c000 size 280
[    0.783446] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[    0.792898] console [ttyS2] disabled
[    0.796623] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 10, base_baud = 3000000) is a 8250
[    0.805417] console [ttyS2] enabled
[    0.805417] console [ttyS2] enabled
[    0.812469] bootconsole [ns16550a0] disabled
[    0.812469] bootconsole [ns16550a0] disabled
[    0.822709] panel-simple display0: failed to request GPIO: -517
[    0.838677] loop: module loaded
[    0.843710] libphy: Fixed MDIO Bus: probed
[    0.848382] tun: Universal TUN/TAP device driver, 1.6
[    0.853635] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    0.861468] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    0.867436] sky2: driver version 1.30
[    0.872346] VFIO - User Level meta-driver version: 0.3
[    0.878210] i2c /dev entries driver
[    0.882604] sdhci: Secure Digital Host Controller Interface driver
[    0.888789] sdhci: Copyright(c) Pierre Ossman
[    0.893165] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.900067] ledtrig-cpu: registered to indicate activity on CPUs
[    0.906156] ti-sci soc0:dmsc: invalid resource
[    0.911357] optee: probing for conduit method from DT.
I/TC: Dynamic shared memory is disabled
[    0.920450] optee: initialized driver
[    0.925392] NET: Registered protocol family 17
[    0.929947] 9pnet: Installing 9P2000 support
[    0.934285] Key type dns_resolver registered
[    0.939192] registered taskstats version 1
[    0.943909] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517
[    0.951098] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517
[    0.958103] davinci_gpio 42110000.: IRQ not populated, err = -517
[    0.968236] panel-simple display0: failed to request GPIO: -517
[    0.976010] ti-sci soc0:dmsc: invalid resource
[    0.980643] ti-sci soc0:dmsc: ABI: 2.5 (firmware rev 0x0012 '18.10.0-v2018.10 (Curious Crow)')
[    1.006368] random: fast init done
[    1.321582] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517
[    1.328762] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517
[    1.335762] davinci_gpio 42110000.: IRQ not populated, err = -517
[    1.343292] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
[    1.349604] omap_i2c 40b00000.i2c: bus 1 rev0.12 at 400 kHz
[    1.382189] omap_i2c 2000000.i2c: bus 2 rev0.12 at 400 kHz
[    1.411307] pca953x 3-0020: failed reading register
[    1.416200] pca953x: probe of 3-0020 failed with error -121
[    1.421828] omap_i2c 2010000.i2c: bus 3 rev0.12 at 400 kHz
[    1.427992] omap_i2c 2020000.i2c: bus 4 rev0.12 at 400 kHz
[    1.434998] ti-sci-inta 33d00000.interrupt-controller: ti,sci-dst-irq-type resource type ids not available
[    1.447415] keystone-pcie 5600000.pcie-rc: Linked as a consumer to phy-910000.serdes.2
[    1.458535] OF: PCI: host bridge /soc0/pcie-rc@5600000 ranges:
[    1.464387] OF: PCI:    IO 0x18020000..0x1802ffff -> 0x00000000
[    1.470312] OF: PCI:   MEM 0x18030000..0x1fffffff -> 0x18030000
[    2.476498] keystone-pcie 5600000.pcie-rc: phy link never came up
[    2.482711] keystone-pcie 5600000.pcie-rc: PCI host bridge to bus 0000:00
[    2.489505] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.494992] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.501170] pci_bus 0000:00: root bus resource [mem 0x18030000-0x1fffffff]
[    2.508458] pci 0000:00:00.0: BAR 6: assigned [mem 0x18030000-0x1803ffff pref]
[    2.515689] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    2.521074] pcieport 0000:00:00.0: limiting MRRS to 256
[    2.526574] pcieport 0000:00:00.0: Signaling PME with IRQ 28
[    2.532341] pcieport 0000:00:00.0: AER enabled with IRQ 28
[    2.539382] k3-navss-ringacc 3c000000.ringacc: Ring Accelerator probed rings:818, gp-rings[304,464] sci-dev-id:187
[    2.549732] k3-navss-ringacc 3c000000.ringacc: dma-ring-reset-quirk: enabled
[    2.556778] k3-navss-ringacc 3c000000.ringacc: RA Proxy rev. 66344100, num_proxies:64
[    2.564801] k3-navss-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,255] sci-dev-id:195
[    2.575058] k3-navss-ringacc 2b800000.ringacc: dma-ring-reset-quirk: enabled
[    2.582103] k3-navss-ringacc 2b800000.ringacc: RA Proxy rev. 66344100, num_proxies:64
[    2.591651] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.598283] [drm] No driver support for vblank timestamp query.
[    3.163748] Console: switching to colour frame buffer device 160x50
[    3.202014] tidss 4a00000.dss: fb0:  frame buffer device
[    3.207693] [drm] Initialized tidss 1.0.0 20180215 for 4a00000.dss on minor 0
[    3.216806] cadence-qspi 47040000.ospi: mt35xu512 (65536 Kbytes)
[    3.222847] 7 cmdlinepart partitions found on MTD device 47040000.ospi.0
[    3.229552] Creating 7 MTD partitions on "47040000.ospi.0":
[    3.235131] 0x000000000000-0x000000080000 : "ospi.tiboot3"
[    3.241410] 0x000000080000-0x000000280000 : "ospi.tispl"
[    3.247390] 0x000000280000-0x000000680000 : "ospi.u-boot"
[    3.253453] 0x000000680000-0x0000006a0000 : "ospi.env"
[    3.259229] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup"
[    3.265671] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw"
[    3.271592] 0x000000800000-0x000004000000 : "ospi.rootfs"
[    3.387494] cadence-qspi 47040000.ospi: Cadence QSPI NOR probe failed -517
[    3.396076] spi spi2.0: not using DMA for McSPI (-19)
[    3.401366] m25p80 spi2.0: unrecognized JEDEC id bytes: 3f, ff, 1f
[    3.407554] m25p80: probe of spi2.0 failed with error -2
[    3.413346] am65-cpsw-nuss 46000000.ethernet: rx-flow-id-base is not set -22
[    3.420572] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA07100, cpsw version 0x6BA80100 Ports: 2
[    3.432181] UDMA has not been proped
[    3.435771] am65-cpsw-nuss 46000000.ethernet: Failed to request tx dma channel -517
[    3.445426] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a2109, freq:200000000, add_val:4
[    3.455356] mmc0: Unknown controller version (4). You may experience problems.
[    3.507266] mmc0: SDHCI controller on 4f80000.sdhci [4f80000.sdhci] using ADMA 64-bit
[    3.519745] mmc1: Unknown controller version (4). You may experience problems.
[    3.571270] mmc1: SDHCI controller on 4fa0000.sdhci [4fa0000.sdhci] using ADMA 64-bit
[    3.581358] mmc0: new HS200 MMC card at address 0001
[    3.588669] mmcblk0: mmc0:0001 R1J56L 14.7 GiB
[    3.593552] mmcblk0boot0: mmc0:0001 R1J56L partition 1 8.00 MiB
[    3.602401] mmcblk0boot1: mmc0:0001 R1J56L partition 2 8.00 MiB
[    3.608639] mmcblk0rpmb: mmc0:0001 R1J56L partition 3 4.00 MiB
[    3.650063] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc5900
[    3.657120] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc5900
[    3.664574] ti-udma 31150000.udmap: Channels: 267 (tchan: 120, echan: 32, rchan: 150, rflow: 300)
[    3.674571] mmc1: new high speed SDHC card at address aaaa
[    3.680554] mmcblk1: mmc1:aaaa SA08G 7.40 GiB
[    3.699659] ti-udma 285c0000.udmap: Channels: 96 (tchan: 48, echan: 0, rchan: 48, rflow: 96)
[    3.708158]  mmcblk1: p1 p2
[    3.718119] cadence-qspi 47040000.ospi: mt35xu512 (65536 Kbytes)
[    3.724159] 7 cmdlinepart partitions found on MTD device 47040000.ospi.0
[    3.730865] Creating 7 MTD partitions on "47040000.ospi.0":
[    3.736447] 0x000000000000-0x000000080000 : "ospi.tiboot3"
[    3.742760] 0x000000080000-0x000000280000 : "ospi.tispl"
[    3.748722] 0x000000280000-0x000000680000 : "ospi.u-boot"
[    3.754758] 0x000000680000-0x0000006a0000 : "ospi.env"
[    3.760489] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup"
[    3.766872] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw"
[    3.772849] 0x000000800000-0x000004000000 : "ospi.rootfs"
[    3.781154] am65-cpsw-nuss 46000000.ethernet: rx-flow-id-base is not set -22
[    3.788336] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA07100, cpsw version 0x6BA80100 Ports: 2
[    3.806187] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48
[    3.817505] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a2109, freq:200000000, add_val:4
[    3.825978] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 0.4
[    3.833197] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[    3.875263] am65-cpsw-nuss 46000000.ethernet: davinci mdio revision 9.7, bus freq 1000000
[    3.883439] libphy: 46000000.ethernet: probed
[    3.890888] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.897878] hctosys: unable to open rtc device (rtc0)
[    4.000324] ALSA device list:
[    4.003309]   No soundcards found.
[    4.538848] EXT4-fs (mmcblk1p2): 4 orphan inodes deleted
[    4.544208] EXT4-fs (mmcblk1p2): recovery complete
[    4.562874] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.571025] VFS: Mounted root (ext4 filesystem) on device 179:130.
[    4.578606] devtmpfs: mounted
[    4.581813] Freeing unused kernel memory: 448K
[    4.851193] systemd[1]: System time before build time, advancing clock.
[    4.944069] NET: Registered protocol family 10
[    4.949711] Segment Routing with IPv6
[    4.994988] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
[    5.016175] systemd[1]: Detected architecture arm64.

Welcome to Arago 2018.10!

[    5.041131] systemd[1]: Set hostname to <am65xx-evm>.
[    5.370857] random: systemd: uninitialized urandom read (16 bytes read)
[    5.378034] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[    5.399621] random: systemd: uninitialized urandom read (16 bytes read)
[    5.406388] systemd[1]: Listening on Network Service Netlink Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[    5.423344] random: systemd: uninitialized urandom read (16 bytes read)
[    5.430139] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    5.447855] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev Control Socket.
[    5.463402] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[    5.481090] systemd[1]: Created slice User and Session Slice.
[  OK  ] Created slice User and Session Slice.
[    5.499559] systemd[1]: Listening on Syslog Socket.
[  OK  ] Listening on Syslog Socket.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Reached target Swap.
[  OK  ] Listening on Journal Socket.
[  OK  ] Listening on Process Core Dump Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Reached target Paths.
[  OK  ] Created slice System Slice.
         Starting Load Kernel Modules...
         Mounting Huge Pages File System...
[    5.659144] cryptodev: loading out-of-tree module taints kernel.
[    5.667091] cryptodev: driver 1.9 loaded.
         Mounting Temporary Directory (/tmp)...
[  OK  ] Reached target Slices.
[  OK  ] Created slice system-getty.slice.
         Starting Remount Root and Kernel File Systems...
         Mounting POSIX Message Queue File System...
[    5.743904] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
         Starting Create list of required stce nodes for the current kernel...
         Mounting Kernel Debug File System...
[  OK  ] Created slice system-serial\x2dgetty.slice.
         Starting Journal Service...
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted Temporary Directory (/tmp).
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Create list of required stavice nodes for the current kernel.
[  OK  ] Started Journal Service.
         Starting Rebuild Hardware Database...
         Starting Create System Users...
         Starting Flush Journal to Persistent Storage...
         Starting Apply Kernel Variables...
         Mounting Kernel Configuration File System...
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Started Create System Users.
[  OK  ] Started Apply Kernel Variables.
         Starting Create Static Device Nodes in /dev...
[    6.104186] systemd-journald[151]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /media/ram...
         Mounting /var/volatile...
         Starting udev Kernel Device Manager...
[  OK  ] Mounted /var/volatile.
[  OK  ] Mounted /media/ram.
         Starting Load/Save Random Seed...
[  OK  ] Reached target Local File Systems.
         Starting Rebuild Dynamic Linker Cache...
         Starting Rebuild Journal Catalog...
         Starting Create Volatile Files and Directories...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create Volatile Files and Directories.
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Rebuild Journal Catalog.
[  OK  ] Started Rebuild Dynamic Linker Cache.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Rebuild Hardware Database.
         Starting udev Coldplug all Devices...
         Starting Update is Completed...
[  OK  ] Started Update is Completed.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Created slice system-systemd\x2dbacklight.slice.
         Starting Load/Save Screen Backlightightness of backlight:backlight...
[  OK  ] Found device /dev/ttyS2.
[  OK  ] Started Load/Save Screen Backlight Brightness of backlight:backlight.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Listening on RPCbind Server Activation Socket.
         Starting Network Service...
[  OK  ] Listening on D-Bus System Message Bus Socket.
[    8.450403] Goodix-TS 3-0014: i2c test failed attempt 1: -121
[    8.469983] at24 0-0050: 131072 byte 24c1024 EEPROM, writable, 1 bytes/write
[    8.473862] omap_rng 4e10000.trng: Random Number Generator ver. 230b34c
[    8.483430] Goodix-TS 3-0014: i2c test failed attempt 2: -121
[    8.492967] [drm] Initialized pvr 1.17.4948957 20110701 for 7000000.gpu on minor 1
[  OK  ] Listening on dropbear.socket.
[    8.505315] pruss b000000.icssg: creating PRU cores and other child platform devices
[    8.511427] Goodix-TS 3-0014: I2C communication failure: -121
[    8.511485] Goodix-TS: probe of 3-0014 failed with error -121
[    8.514715] ov490: probe of 3-0024 failed with error -121
[  OK  ] Reached target Sockets.
[    8.550946] remoteproc remoteproc0: b034000.pru is available
[    8.557785] pru-rproc b034000.pru: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/pru@34000 probed successfully
[  OK  ] Reached target Basic System.
[    8.580973] remoteproc remoteproc1: b004000.rtu is available
[    8.589379] pru-rproc b004000.rtu: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/rtu@4000 probed successfully
[  OK  ] Started Job spooling tools.[    8.603833] remoteproc remoteproc2: b038000.pru is available

[    8.611818] pru-rproc b038000.pru: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/pru@38000 probed successfully
[  OK  ] Started System Logging Service.[    8.642844] remoteproc remoteproc3: b006000.rtu is available

[    8.652009] pru-rproc b006000.rtu: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/rtu@6000 probed successfully
[    8.666001] cal: One phy/port only.
         Starting TI IPC Daemon...
[    8.682650] pruss b100000.icssg: creating PRU cores and other child platform devices
[    8.706588] remoteproc remoteproc4: b134000.pru is available
         Starting RPC Bind Service...[    8.727738] pru-rproc b134000.pru: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/pru@34000 probed successfully

[    8.750610] remoteproc remoteproc5: b104000.rtu is available
[    8.756620] pru-rproc b104000.rtu: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/rtu@4000 probed successfully
         Starting Login Service...
[    8.771420] remoteproc remoteproc6: b138000.pru is available
[    8.779670] pru-rproc b138000.pru: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/pru@38000 probed successfully
[  OK  ] Reached target Containers.[    8.803978] remoteproc remoteproc7: b106000.rtu is available

[    8.810960] pru-rproc b106000.rtu: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/rtu@6000 probed successfully
[    8.825488] pruss b200000.icssg: creating PRU cores and other child platform devices
[  OK  ] Started Periodic Command Scheduler.
[    8.837241] remoteproc remoteproc8: b234000.pru is available
[    8.844556] pru-rproc b234000.pru: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/pru@34000 probed successfully
[    8.857191] remoteproc remoteproc9: b204000.rtu is available
[    8.866723] pru-rproc b204000.rtu: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/rtu@4000 probed successfully
[    8.869271] remoteproc remoteproc10: b238000.pru is available
[    8.869334] pru-rproc b238000.pru: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/pru@38000 probed successfully
[    8.871106] remoteproc remoteproc11: b206000.rtu is available
[    8.871160] pru-rproc b206000.rtu: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/rtu@6000 probed successfully
[    8.911325] davinci_mdio b232400.mdio: davinci mdio revision 1.7, bus freq 1000000
[    8.911334] libphy: b232400.mdio: probed
[    8.931352] davinci_mdio b232400.mdio: phy[0]: device b232400.mdio:00, driver TI DP83867
[    8.931360] davinci_mdio b232400.mdio: phy[3]: device b232400.mdio:03, driver TI DP83867
[    8.943838] icssg-prueth pruss2_eth: TI PRU ethernet driver initialized: dual EMAC mode
[  OK  ] Started Kernel Logging Service.
         Starting rc.pvr.service...
[    8.981967] k3_r5_rproc soc0:mcu_r5f_cluster@41000000: creating child devices for R5F cores
[  OK  ] Started D-Bus System Message Bus.
[    9.067738] platform 41000000.r5f: boot_vector = 0x41c00000, cfg = 0x1903 ctrl = 0x0 stat = 0x104
[    9.084794] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ]
[    9.129810] platform 41000000.r5f: assigned reserved memory node r5f0-dma-memory@9c000000
[    9.141865] remoteproc remoteproc12: 41000000.r5f is available
[  OK  ] Started Hardware RNG Entropy Gatherer Daemon.
         Starting Print notice about GPLv3 packages...
[  OK  ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf.
[  OK  ] Started TI IPC Daemon.
[  OK  ] Started RPC Bind Service.
[  OK  ] Started Login Service.
[    9.349930] remoteproc remoteproc12: powering up 41000000.r5f
[    9.357941] remoteproc remoteproc12: Booting fw image am65x-mcu-r5f0-fw, size 3864336
[    9.385673] platform 41000000.r5f: booting R5F core using boot addr = 0x0
[    9.395016] remoteproc remoteproc12: registered virtio0 (type 7)
[    9.402472] remoteproc remoteproc12: remote processor 41000000.r5f is now up
[  OK  ] Started Network Service.[    9.431702] random: crng init done

[    9.435239] random: 7 urandom warning(s) missed due to ratelimiting
[    9.443859] am65-cpsw-nuss 46000000.ethernet: Phy mode driver DT not found
[    9.464324] TI DP83867 k3-cpsw-mdio:00: attached PHY driver [TI DP83867] (mii_bus:phy_addr=k3-cpsw-mdio:00, irq=POLL)
[    9.482212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  OK  ] Reached target Network.
         Starting Network Name Resolution...
         Starting Permit User Sessions...
         Starting Lightning Fast Webserver With Light System Requirements...
         Starting Simple Network Management Protocol (SNMP) Daemon....
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Getty on tty1.
[  OK  ] Started Serial Getty on ttyS2.
[  OK  ] Reached target Login Prompts.
         Starting Synchronize System and HW clocks...
[FAILED] Failed to start Synchronize System and HW clocks.
See 'systemctl status sync-clocks.service' for details.
[    9.814717] remoteproc remoteproc10: powering up b238000.pru
[    9.834501] remoteproc remoteproc10: Booting fw image ti-pruss/am65x-pru1-prueth-fw.elf, size 15040
[    9.844001] remoteproc remoteproc10: remote processor b238000.pru is now up
[    9.851501] remoteproc remoteproc11: powering up b206000.rtu
[    9.884790] virtio_rpmsg_bus virtio0: rpmsg host is online
[    9.885604] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x3d
[    9.890582] remoteproc remoteproc11: Booting fw image ti-pruss/am65x-rtu1-prueth-fw.elf, size 16568
[    9.890623] remoteproc remoteproc11: remote processor b206000.rtu is now up
[    9.892661] icssg-prueth pruss2_eth: setting rx flow id 150
[    9.894010] net eth2: started
[    9.894273] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[    9.926985] remoteproc remoteproc8: powering up b234000.pru
[    9.929455] remoteproc remoteproc8: Booting fw image ti-pruss/am65x-pru0-prueth-fw.elf, size 15120
[    9.929493] remoteproc remoteproc8: remote processor b234000.pru is now up
[    9.929523] remoteproc remoteproc9: powering up b204000.rtu
[    9.932470] remoteproc remoteproc9: Booting fw image ti-pruss/am65x-rtu0-prueth-fw.elf, size 16552
[    9.932509] remoteproc remoteproc9: remote processor b204000.rtu is now up
[    9.934542] icssg-prueth pruss2_eth: setting rx flow id 151
[    9.935949] net eth1: started
[    9.936266] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  OK  ] Started Network Name Resolution.
[  OK  ] Started Lightning Fast Webserver With Light System Requirements.
[  OK  ] Reached target Host and Network Name Lookups.
[   10.024637] usbcore: registered new interface driver usbfs
[   10.030271] usbcore: registered new interface driver hub
[   10.035908] usbcore: registered new device driver usb
[  OK  ] Started NFS status monitor for NFSv2/3 locking..
[   10.056021] NET: Registered protocol family 44
[   10.083183] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   10.088798] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   10.097123] xhci-hcd xhci-hcd.0.auto: hcc params 0x0298fe6d hci version 0x110 quirks 0x00010010
[   10.106052] xhci-hcd xhci-hcd.0.auto: irq 296, io mem 0x04030000
[   10.112268] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   10.119134] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.126414] usb usb1: Product: xHCI Host Controller
[   10.131359] usb usb1: Manufacturer: Linux 4.14.79-gbde58ab01e xhci-hcd
[   10.137935] usb usb1: SerialNumber: xhci-hcd.0.auto
[   10.143628] hub 1-0:1.0: USB hub found
[   10.147449] hub 1-0:1.0: 1 port detected
[   10.151920] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   10.157529] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   10.165375] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[   10.172254] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   10.180603] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[   10.187466] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.187743] NET: Registered protocol family 15
[   10.199304] usb usb2: Product: xHCI Host Controller
[   10.204221] usb usb2: Manufacturer: Linux 4.14.79-gbde58ab01e xhci-hcd
[   10.210841] usb usb2: SerialNumber: xhci-hcd.0.auto
[   10.216495] hub 2-0:1.0: USB hub found
[   10.220380] hub 2-0:1.0: 1 port detected
[   10.402530] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   10.496713] am65-cpsw-nuss 46000000.ethernet eth0: Link is Down
[   10.505502] Initializing XFRM netlink socket
[  OK  ] Started Simple Network Management Protocol (SNMP) Daemon..
[  OK  ] Started rc.pvr.service.
         Starting weston.service...
[  OK  ] Started weston.service.
         Starting Matrix GUI...
         Starting telnetd.service...
[  OK  ] Started telnetd.service.
         Starting thttpd.service...
[  OK  ] Started Matrix GUI.
[  OK  ] Started thttpd.service.
         Starting rng-tools.service...
[  OK  ] Started rng-tools.service.
         Starting thermal-zone-init.service...
[  OK  ] Started thermal-zone-init.service.
[   13.568818] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   13.577577] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

 _____                    _____           _         _
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|
              |___|                    |___|

Arago Project http://arago-project.org am65xx-evm ttyS2

Arago 2018.10 am65xx-evm ttyS2

am65xx-evm login: ***************************************************************
***************************************************************
NOTICE: This file system contains the following GPLv3 packages:
        autoconf
        bash
        binutils
        cifs-utils
        cpio
        cpp-symlinks
        cpp
        dosfstools
        elfutils
        g++-symlinks
        g++
        gawk
        gcc-symlinks
        gcc
        gdb
        gdbserver
        gettext
        glmark2
        gstreamer1.0-libav
        gzip
        hidapi
        libdw1
        libelf1
        libgdbm-compat4
        libgdbm4
        libgettextlib
        libgettextsrc
        libgmp10
        libidn11
        libmpc3
        libmpfr4
        libreadline7
        libunistring2
        m4
        make
        nettle
        parted
        python3-pycairo
        which

If you do not wish to distribute GPLv3 components please remove
the above packages prior to distribution.  This can be done using
the opkg remove command.  i.e.:
    opkg remove <package>
Where <package> is the name printed in the list above

NOTE: If the package is a dependency of another package you
      will be notified of the dependent packages.  You should
      use the --force-removal-of-dependent-packages option to
      also remove the dependent packages as well
***************************************************************
***************************************************************

 _____                    _____           _         _
|  _  |___ ___ ___ ___   |  _  |___ ___  |_|___ ___| |_
|     |  _| .'| . | . |  |   __|  _| . | | | -_|  _|  _|
|__|__|_| |__,|_  |___|  |__|  |_| |___|_| |___|___|_|
              |___|                    |___|

Arago Project http://arago-project.org am65xx-evm ttyS2

Arago 2018.10 am65xx-evm ttyS2

am65xx-evm login: root
root@am65xx-evm:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.79-gbde58ab01e (oe-user@oe-host) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #1 SMP PREEMPT Thu Dec 20 03:19:19 UTC 2018
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Machine model: Texas Instruments AM654 Base Board
[    0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[    0.000000] bootconsole [ns16550a0] enabled
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009b000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node r5f1-dma-memory@9b000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009b100000, size 15 MiB
[    0.000000] OF: reserved mem: initialized node r5f1-memory@9b100000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009c000000, size 1 MiB
[    0.000000] OF: reserved mem: initialized node r5f0-dma-memory@9c000000, compatible id shared-dma-pool
[    0.000000] Reserved memory: created DMA memory pool at 0x000000009c100000, size 7 MiB
[    0.000000] OF: reserved mem: initialized node r5f0-memory@9c100000, compatible id shared-dma-pool
[    0.000000] cma: Reserved 512 MiB at 0x00000000c0000000
[    0.000000] On node 0 totalpages: 64768
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 32000 pages, LIFO batch:1
[    0.000000]   Normal zone: 32 pages used for memmap
[    0.000000]   Normal zone: 32768 pages, LIFO batch:1
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] percpu: Embedded 2 pages/cpu @ffff80087feb0000 s38936 r8192 d83944 u131072
[    0.000000] pcpu-alloc: s38936 r8192 d83944 u131072 alloc=2*65536
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64704
[    0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 mtdparts=47040000.ospi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),-@8m(ospi.rootfs) root=PARTUUID=0009559b-02 rw rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 6, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 5, 2097152 bytes)
[    0.000000] software IO TLB [mem 0xf9db0000-0xfddb0000] (64MB) mapped at [ffff800079db0000-ffff80007ddaffff]
[    0.000000] Memory: 3529664K/4145152K available (7422K kernel code, 660K rwdata, 2816K rodata, 448K init, 654K bss, 91200K reserved, 524288K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7bdfffff0000   (126847 GB)
[    0.000000]       .text : 0xffff000008080000 - 0xffff0000087c0000   (  7424 KB)
[    0.000000]     .rodata : 0xffff0000087c0000 - 0xffff000008a90000   (  2880 KB)
[    0.000000]       .init : 0xffff000008a90000 - 0xffff000008b00000   (   448 KB)
[    0.000000]       .data : 0xffff000008b00000 - 0xffff000008ba5008   (   661 KB)
[    0.000000]        .bss : 0xffff000008ba5008 - 0xffff000008c48a60   (   655 KB)
[    0.000000]     fixed   : 0xffff7fdffe7b0000 - 0xffff7fdffec00000   (  4416 KB)
[    0.000000]     PCI I/O : 0xffff7fdffee00000 - 0xffff7fdfffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffff7fe000000000 - 0xffff800000000000   (   128 GB maximum)
[    0.000000]               0xffff7fe000000000 - 0xffff7fe002200000   (    34 MB actual)
[    0.000000]     memory  : 0xffff800000000000 - 0xffff800880000000   ( 34816 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] ITS [mem 0x01820000-0x0182ffff]
[    0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[    0.000000] ITS@0x0000000001820000: allocated 1048576 Devices @8c0800000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000008c00b0000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001880000
[    0.000000] CPU0: using LPI pending table @0x00000008c00c0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[    0.000005] sched_clock: 56 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[    0.008618] Console: colour dummy device 80x25
[    0.013201] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[    0.023888] pid_max: default: 32768 minimum: 301
[    0.028741] Security Framework initialized
[    0.033000] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes)
[    0.039879] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes)
[    0.063292] ASID allocator initialised with 32768 entries
[    0.068931] Hierarchical SRCU implementation.
[    0.081493] PCI/MSI: /soc0/interrupt-controller@1800000/gic-its@1000000 domain created
[    0.089884] Platform MSI: /soc0/interrupt-controller@1800000/gic-its@1000000 domain created
[    0.106467] smp: Bringing up secondary CPUs ...
[    0.139603] Detected VIPT I-cache on CPU1
[    0.139641] GICv3: CPU1: found redistributor 1 region 0:0x00000000018a0000
[    0.139688] CPU1: using LPI pending table @0x00000008c0360000
[    0.139734] CPU1: Booted secondary processor [410fd034]
[    0.196620] Detected VIPT I-cache on CPU2
[    0.196660] GICv3: CPU2: found redistributor 100 region 0:0x00000000018c0000
[    0.196711] CPU2: using LPI pending table @0x00000008c03d0000
[    0.196760] CPU2: Booted secondary processor [410fd034]
[    0.225030] Detected VIPT I-cache on CPU3
[    0.225058] GICv3: CPU3: found redistributor 101 region 0:0x00000000018e0000
[    0.225103] CPU3: using LPI pending table @0x00000008c0430000
[    0.225132] CPU3: Booted secondary processor [410fd034]
[    0.225264] smp: Brought up 1 node, 4 CPUs
[    0.296923] SMP: Total of 4 processors activated.
[    0.301740] CPU features: detected feature: GIC system register CPU interface
[    0.309042] CPU features: detected feature: 32-bit EL0 Support
[    0.315013] CPU features: detected feature: Kernel page table isolation (KPTI)
[    0.346322] CPU: All CPU(s) started at EL2
[    0.350540] alternatives: patching kernel code
[    0.356509] devtmpfs: initialized
[    0.369149] random: get_random_u32 called from bucket_table_alloc+0x108/0x258 with crng_init=0
[    0.378765] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.388760] futex hash table entries: 1024 (order: 1, 131072 bytes)
[    0.396590] pinctrl core: initialized pinctrl subsystem
[    0.402570] NET: Registered protocol family 16
[    0.409096] vdso: 2 pages (1 code @ ffff0000087d0000, 1 data @ ffff000008b20000)
[    0.422863] DMA: preallocated 256 KiB pool for atomic allocations
[    0.433437] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517
[    0.440602] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517
[    0.447730] davinci_gpio 42110000.: IRQ not populated, err = -517
[    0.465502] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.472384] HugeTLB registered 512 MiB page size, pre-allocated 0 pages
[    0.481674] omap_i2c 42120000.i2c: could not find pctldev for node /soc0/pinmux@4301c000/wkup_i2c0_pins_default, deferring probe
[    0.493589] omap_i2c 40b00000.i2c: could not find pctldev for node /soc0/pinmux@4301c000/mcu_i2c0_pins_default, deferring probe
[    0.505368] omap_i2c 2000000.i2c: could not find pctldev for node /soc0/pinmux@11c2e8/main_i2c0_pins_default, deferring probe
[    0.516968] omap_i2c 2010000.i2c: could not find pctldev for node /soc0/pinmux@11c2e8/main_i2c1_pins_default, deferring probe
[    0.528565] omap_i2c 2020000.i2c: could not find pctldev for node /soc0/pinmux@11c000/main_i2c2_pins_default, deferring probe
[    0.540270] media: Linux media interface: v0.10
[    0.544933] Linux video capture interface: v2.00
[    0.549697] pps_core: LinuxPPS API ver. 1 registered
[    0.554777] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.564135] PTP clock support registered
[    0.568171] EDAC MC: Ver: 3.0.0
[    0.572285] Advanced Linux Sound Architecture Driver Initialized.
[    0.579256] clocksource: Switched to clocksource arch_sys_counter
[    0.585676] VFS: Disk quotas dquot_6.6.0
[    0.589803] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
[    0.603805] NET: Registered protocol family 2
[    0.608799] TCP established hash table entries: 32768 (order: 2, 262144 bytes)
[    0.616509] TCP bind hash table entries: 32768 (order: 3, 524288 bytes)
[    0.623856] TCP: Hash tables configured (established 32768 bind 32768)
[    0.630691] UDP hash table entries: 2048 (order: 0, 65536 bytes)
[    0.636958] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes)
[    0.643824] NET: Registered protocol family 1
[    0.648778] RPC: Registered named UNIX socket transport module.
[    0.654856] RPC: Registered udp transport module.
[    0.659670] RPC: Registered tcp transport module.
[    0.664484] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.671083] PCI: CLS 0 bytes, default 128
[    0.676223] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    0.688085] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.694644] NFS: Registering the id_resolver key type
[    0.699896] Key type id_resolver registered
[    0.704187] Key type id_legacy registered
[    0.708303] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.715400] 9p: Installing v9fs 9p2000 file system support
[    0.725249] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.732845] io scheduler noop registered
[    0.736980] io scheduler cfq registered (default)
[    0.741805] io scheduler mq-deadline registered
[    0.746444] io scheduler kyber registered
[    0.752697] pinctrl-single 11c000.pinmux: 185 pins at pa ffff000009bcc000 size 740
[    0.760597] pinctrl-single 11c2e8.pinmux: 9 pins at pa ffff000009bec2e8 size 36
[    0.768307] pinctrl-single 4301c000.pinmux: 70 pins at pa ffff000009c0c000 size 280
[    0.783446] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled
[    0.792898] console [ttyS2] disabled
[    0.796623] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 10, base_baud = 3000000) is a 8250
[    0.805417] console [ttyS2] enabled
[    0.812469] bootconsole [ns16550a0] disabled
[    0.822709] panel-simple display0: failed to request GPIO: -517
[    0.838677] loop: module loaded
[    0.843710] libphy: Fixed MDIO Bus: probed
[    0.848382] tun: Universal TUN/TAP device driver, 1.6
[    0.853635] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    0.861468] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    0.867436] sky2: driver version 1.30
[    0.872346] VFIO - User Level meta-driver version: 0.3
[    0.878210] i2c /dev entries driver
[    0.882604] sdhci: Secure Digital Host Controller Interface driver
[    0.888789] sdhci: Copyright(c) Pierre Ossman
[    0.893165] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.900067] ledtrig-cpu: registered to indicate activity on CPUs
[    0.906156] ti-sci soc0:dmsc: invalid resource
[    0.911357] optee: probing for conduit method from DT.
[    0.920450] optee: initialized driver
[    0.925392] NET: Registered protocol family 17
[    0.929947] 9pnet: Installing 9P2000 support
[    0.934285] Key type dns_resolver registered
[    0.939192] registered taskstats version 1
[    0.943909] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517
[    0.951098] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517
[    0.958103] davinci_gpio 42110000.: IRQ not populated, err = -517
[    0.968236] panel-simple display0: failed to request GPIO: -517
[    0.976010] ti-sci soc0:dmsc: invalid resource
[    0.980643] ti-sci soc0:dmsc: ABI: 2.5 (firmware rev 0x0012 '18.10.0-v2018.10 (Curious Crow)')
[    1.006368] random: fast init done
[    1.321582] davinci_gpio 600000.main_gpio0: IRQ not populated, err = -517
[    1.328762] davinci_gpio 601000.main_gpio1: IRQ not populated, err = -517
[    1.335762] davinci_gpio 42110000.: IRQ not populated, err = -517
[    1.343292] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
[    1.349604] omap_i2c 40b00000.i2c: bus 1 rev0.12 at 400 kHz
[    1.382189] omap_i2c 2000000.i2c: bus 2 rev0.12 at 400 kHz
[    1.411307] pca953x 3-0020: failed reading register
[    1.416200] pca953x: probe of 3-0020 failed with error -121
[    1.421828] omap_i2c 2010000.i2c: bus 3 rev0.12 at 400 kHz
[    1.427992] omap_i2c 2020000.i2c: bus 4 rev0.12 at 400 kHz
[    1.434998] ti-sci-inta 33d00000.interrupt-controller: ti,sci-dst-irq-type resource type ids not available
[    1.447415] keystone-pcie 5600000.pcie-rc: Linked as a consumer to phy-910000.serdes.2
[    1.458535] OF: PCI: host bridge /soc0/pcie-rc@5600000 ranges:
[    1.464387] OF: PCI:    IO 0x18020000..0x1802ffff -> 0x00000000
[    1.470312] OF: PCI:   MEM 0x18030000..0x1fffffff -> 0x18030000
[    2.476498] keystone-pcie 5600000.pcie-rc: phy link never came up
[    2.482711] keystone-pcie 5600000.pcie-rc: PCI host bridge to bus 0000:00
[    2.489505] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.494992] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    2.501170] pci_bus 0000:00: root bus resource [mem 0x18030000-0x1fffffff]
[    2.508066] pci 0000:00:00.0: [104c:b00c] type 01 class 0x060400
[    2.508103] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[    2.508159] pci 0000:00:00.0: supports D1
[    2.508166] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    2.508458] pci 0000:00:00.0: BAR 6: assigned [mem 0x18030000-0x1803ffff pref]
[    2.515689] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    2.521074] pcieport 0000:00:00.0: limiting MRRS to 256
[    2.526574] pcieport 0000:00:00.0: Signaling PME with IRQ 28
[    2.532341] pcieport 0000:00:00.0: AER enabled with IRQ 28
[    2.539382] k3-navss-ringacc 3c000000.ringacc: Ring Accelerator probed rings:818, gp-rings[304,464] sci-dev-id:187
[    2.549732] k3-navss-ringacc 3c000000.ringacc: dma-ring-reset-quirk: enabled
[    2.556778] k3-navss-ringacc 3c000000.ringacc: RA Proxy rev. 66344100, num_proxies:64
[    2.564801] k3-navss-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,255] sci-dev-id:195
[    2.575058] k3-navss-ringacc 2b800000.ringacc: dma-ring-reset-quirk: enabled
[    2.582103] k3-navss-ringacc 2b800000.ringacc: RA Proxy rev. 66344100, num_proxies:64
[    2.591651] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.598283] [drm] No driver support for vblank timestamp query.
[    3.163748] Console: switching to colour frame buffer device 160x50
[    3.202014] tidss 4a00000.dss: fb0:  frame buffer device
[    3.207693] [drm] Initialized tidss 1.0.0 20180215 for 4a00000.dss on minor 0
[    3.216806] cadence-qspi 47040000.ospi: mt35xu512 (65536 Kbytes)
[    3.222847] 7 cmdlinepart partitions found on MTD device 47040000.ospi.0
[    3.229552] Creating 7 MTD partitions on "47040000.ospi.0":
[    3.235131] 0x000000000000-0x000000080000 : "ospi.tiboot3"
[    3.241410] 0x000000080000-0x000000280000 : "ospi.tispl"
[    3.247390] 0x000000280000-0x000000680000 : "ospi.u-boot"
[    3.253453] 0x000000680000-0x0000006a0000 : "ospi.env"
[    3.259229] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup"
[    3.265671] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw"
[    3.271592] 0x000000800000-0x000004000000 : "ospi.rootfs"
[    3.387494] cadence-qspi 47040000.ospi: Cadence QSPI NOR probe failed -517
[    3.396076] spi spi2.0: not using DMA for McSPI (-19)
[    3.401366] m25p80 spi2.0: unrecognized JEDEC id bytes: 3f, ff, 1f
[    3.407554] m25p80: probe of spi2.0 failed with error -2
[    3.413346] am65-cpsw-nuss 46000000.ethernet: rx-flow-id-base is not set -22
[    3.420572] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA07100, cpsw version 0x6BA80100 Ports: 2
[    3.432181] UDMA has not been proped
[    3.435771] am65-cpsw-nuss 46000000.ethernet: Failed to request tx dma channel -517
[    3.445426] am65-cpts 310d0000.cpts: CPTS ver 0x4e8a2109, freq:200000000, add_val:4
[    3.455356] mmc0: Unknown controller version (4). You may experience problems.
[    3.507266] mmc0: SDHCI controller on 4f80000.sdhci [4f80000.sdhci] using ADMA 64-bit
[    3.519745] mmc1: Unknown controller version (4). You may experience problems.
[    3.571270] mmc1: SDHCI controller on 4fa0000.sdhci [4fa0000.sdhci] using ADMA 64-bit
[    3.581358] mmc0: new HS200 MMC card at address 0001
[    3.588669] mmcblk0: mmc0:0001 R1J56L 14.7 GiB
[    3.593552] mmcblk0boot0: mmc0:0001 R1J56L partition 1 8.00 MiB
[    3.602401] mmcblk0boot1: mmc0:0001 R1J56L partition 2 8.00 MiB
[    3.608639] mmcblk0rpmb: mmc0:0001 R1J56L partition 3 4.00 MiB
[    3.650063] omap-mailbox 31f80000.mailbox: omap mailbox rev 0x66fc5900
[    3.657120] omap-mailbox 31f81000.mailbox: omap mailbox rev 0x66fc5900
[    3.664574] ti-udma 31150000.udmap: Channels: 267 (tchan: 120, echan: 32, rchan: 150, rflow: 300)
[    3.674571] mmc1: new high speed SDHC card at address aaaa
[    3.680554] mmcblk1: mmc1:aaaa SA08G 7.40 GiB
[    3.699659] ti-udma 285c0000.udmap: Channels: 96 (tchan: 48, echan: 0, rchan: 48, rflow: 96)
[    3.708158]  mmcblk1: p1 p2
[    3.718119] cadence-qspi 47040000.ospi: mt35xu512 (65536 Kbytes)
[    3.724159] 7 cmdlinepart partitions found on MTD device 47040000.ospi.0
[    3.730865] Creating 7 MTD partitions on "47040000.ospi.0":
[    3.736447] 0x000000000000-0x000000080000 : "ospi.tiboot3"
[    3.742760] 0x000000080000-0x000000280000 : "ospi.tispl"
[    3.748722] 0x000000280000-0x000000680000 : "ospi.u-boot"
[    3.754758] 0x000000680000-0x0000006a0000 : "ospi.env"
[    3.760489] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup"
[    3.766872] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw"
[    3.772849] 0x000000800000-0x000004000000 : "ospi.rootfs"
[    3.781154] am65-cpsw-nuss 46000000.ethernet: rx-flow-id-base is not set -22
[    3.788336] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA07100, cpsw version 0x6BA80100 Ports: 2
[    3.806187] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48
[    3.817505] am65-cpsw-nuss 46000000.ethernet: CPTS ver 0x4e8a2109, freq:200000000, add_val:4
[    3.825978] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 0.4
[    3.833197] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[    3.875263] am65-cpsw-nuss 46000000.ethernet: davinci mdio revision 9.7, bus freq 1000000
[    3.883439] libphy: 46000000.ethernet: probed
[    3.890888] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    3.897878] hctosys: unable to open rtc device (rtc0)
[    4.000324] ALSA device list:
[    4.003309]   No soundcards found.
[    4.538848] EXT4-fs (mmcblk1p2): 4 orphan inodes deleted
[    4.544208] EXT4-fs (mmcblk1p2): recovery complete
[    4.562874] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.571025] VFS: Mounted root (ext4 filesystem) on device 179:130.
[    4.578606] devtmpfs: mounted
[    4.581813] Freeing unused kernel memory: 448K
[    4.851193] systemd[1]: System time before build time, advancing clock.
[    4.944069] NET: Registered protocol family 10
[    4.949711] Segment Routing with IPv6
[    4.994988] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN default-hierarchy=hybrid)
[    5.016175] systemd[1]: Detected architecture arm64.
[    5.041131] systemd[1]: Set hostname to <am65xx-evm>.
[    5.370857] random: systemd: uninitialized urandom read (16 bytes read)
[    5.378034] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.399621] random: systemd: uninitialized urandom read (16 bytes read)
[    5.406388] systemd[1]: Listening on Network Service Netlink Socket.
[    5.423344] random: systemd: uninitialized urandom read (16 bytes read)
[    5.430139] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.447855] systemd[1]: Listening on udev Control Socket.
[    5.463402] systemd[1]: Reached target Remote File Systems.
[    5.481090] systemd[1]: Created slice User and Session Slice.
[    5.499559] systemd[1]: Listening on Syslog Socket.
[    5.659144] cryptodev: loading out-of-tree module taints kernel.
[    5.667091] cryptodev: driver 1.9 loaded.
[    5.743904] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
[    6.104186] systemd-journald[151]: Received request to flush runtime journal from PID 1
[    8.450403] Goodix-TS 3-0014: i2c test failed attempt 1: -121
[    8.469983] at24 0-0050: 131072 byte 24c1024 EEPROM, writable, 1 bytes/write
[    8.473862] omap_rng 4e10000.trng: Random Number Generator ver. 230b34c
[    8.483430] Goodix-TS 3-0014: i2c test failed attempt 2: -121
[    8.492967] [drm] Initialized pvr 1.17.4948957 20110701 for 7000000.gpu on minor 1
[    8.505315] pruss b000000.icssg: creating PRU cores and other child platform devices
[    8.511427] Goodix-TS 3-0014: I2C communication failure: -121
[    8.511485] Goodix-TS: probe of 3-0014 failed with error -121
[    8.514715] ov490: probe of 3-0024 failed with error -121
[    8.550946] remoteproc remoteproc0: b034000.pru is available
[    8.557785] pru-rproc b034000.pru: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/pru@34000 probed successfully
[    8.580973] remoteproc remoteproc1: b004000.rtu is available
[    8.589379] pru-rproc b004000.rtu: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/rtu@4000 probed successfully
[    8.603833] remoteproc remoteproc2: b038000.pru is available
[    8.611818] pru-rproc b038000.pru: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/pru@38000 probed successfully
[    8.642844] remoteproc remoteproc3: b006000.rtu is available
[    8.652009] pru-rproc b006000.rtu: PRU rproc node /soc0/pruss_soc_bus@b026004/icssg@0/rtu@6000 probed successfully
[    8.666001] cal: One phy/port only.
[    8.682650] pruss b100000.icssg: creating PRU cores and other child platform devices
[    8.706588] remoteproc remoteproc4: b134000.pru is available
[    8.727738] pru-rproc b134000.pru: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/pru@34000 probed successfully
[    8.750610] remoteproc remoteproc5: b104000.rtu is available
[    8.756620] pru-rproc b104000.rtu: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/rtu@4000 probed successfully
[    8.771420] remoteproc remoteproc6: b138000.pru is available
[    8.779670] pru-rproc b138000.pru: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/pru@38000 probed successfully
[    8.803978] remoteproc remoteproc7: b106000.rtu is available
[    8.810960] pru-rproc b106000.rtu: PRU rproc node /soc0/pruss_soc_bus@b126004/icssg@0/rtu@6000 probed successfully
[    8.825488] pruss b200000.icssg: creating PRU cores and other child platform devices
[    8.837241] remoteproc remoteproc8: b234000.pru is available
[    8.844556] pru-rproc b234000.pru: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/pru@34000 probed successfully
[    8.857191] remoteproc remoteproc9: b204000.rtu is available
[    8.866723] pru-rproc b204000.rtu: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/rtu@4000 probed successfully
[    8.869271] remoteproc remoteproc10: b238000.pru is available
[    8.869334] pru-rproc b238000.pru: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/pru@38000 probed successfully
[    8.871106] remoteproc remoteproc11: b206000.rtu is available
[    8.871160] pru-rproc b206000.rtu: PRU rproc node /soc0/pruss_soc_bus@b226004/icssg@0/rtu@6000 probed successfully
[    8.911325] davinci_mdio b232400.mdio: davinci mdio revision 1.7, bus freq 1000000
[    8.911334] libphy: b232400.mdio: probed
[    8.931352] davinci_mdio b232400.mdio: phy[0]: device b232400.mdio:00, driver TI DP83867
[    8.931360] davinci_mdio b232400.mdio: phy[3]: device b232400.mdio:03, driver TI DP83867
[    8.943838] icssg-prueth pruss2_eth: TI PRU ethernet driver initialized: dual EMAC mode
[    8.981967] k3_r5_rproc soc0:mcu_r5f_cluster@41000000: creating child devices for R5F cores
[    9.067738] platform 41000000.r5f: boot_vector = 0x41c00000, cfg = 0x1903 ctrl = 0x0 stat = 0x104
[    9.084794] PVR_K: UM DDK-(4948957) and KM DDK-(4948957) match. [ OK ]
[    9.129810] platform 41000000.r5f: assigned reserved memory node r5f0-dma-memory@9c000000
[    9.141865] remoteproc remoteproc12: 41000000.r5f is available
[    9.349930] remoteproc remoteproc12: powering up 41000000.r5f
[    9.357941] remoteproc remoteproc12: Booting fw image am65x-mcu-r5f0-fw, size 3864336
[    9.385673] platform 41000000.r5f: booting R5F core using boot addr = 0x0
[    9.395016] remoteproc remoteproc12: registered virtio0 (type 7)
[    9.402472] remoteproc remoteproc12: remote processor 41000000.r5f is now up
[    9.431702] random: crng init done
[    9.435239] random: 7 urandom warning(s) missed due to ratelimiting
[    9.443859] am65-cpsw-nuss 46000000.ethernet: Phy mode driver DT not found
[    9.464324] TI DP83867 k3-cpsw-mdio:00: attached PHY driver [TI DP83867] (mii_bus:phy_addr=k3-cpsw-mdio:00, irq=POLL)
[    9.482212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.814717] remoteproc remoteproc10: powering up b238000.pru
[    9.834501] remoteproc remoteproc10: Booting fw image ti-pruss/am65x-pru1-prueth-fw.elf, size 15040
[    9.844001] remoteproc remoteproc10: remote processor b238000.pru is now up
[    9.851501] remoteproc remoteproc11: powering up b206000.rtu
[    9.884790] virtio_rpmsg_bus virtio0: rpmsg host is online
[    9.885604] virtio_rpmsg_bus virtio0: creating channel rpmsg-proto addr 0x3d
[    9.890582] remoteproc remoteproc11: Booting fw image ti-pruss/am65x-rtu1-prueth-fw.elf, size 16568
[    9.890623] remoteproc remoteproc11: remote processor b206000.rtu is now up
[    9.892661] icssg-prueth pruss2_eth: setting rx flow id 150
[    9.894010] net eth2: started
[    9.894273] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[    9.926985] remoteproc remoteproc8: powering up b234000.pru
[    9.929455] remoteproc remoteproc8: Booting fw image ti-pruss/am65x-pru0-prueth-fw.elf, size 15120
[    9.929493] remoteproc remoteproc8: remote processor b234000.pru is now up
[    9.929523] remoteproc remoteproc9: powering up b204000.rtu
[    9.932470] remoteproc remoteproc9: Booting fw image ti-pruss/am65x-rtu0-prueth-fw.elf, size 16552
[    9.932509] remoteproc remoteproc9: remote processor b204000.rtu is now up
[    9.934542] icssg-prueth pruss2_eth: setting rx flow id 151
[    9.935949] net eth1: started
[    9.936266] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   10.024637] usbcore: registered new interface driver usbfs
[   10.030271] usbcore: registered new interface driver hub
[   10.035908] usbcore: registered new device driver usb
[   10.056021] NET: Registered protocol family 44
[   10.083183] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   10.088798] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   10.097123] xhci-hcd xhci-hcd.0.auto: hcc params 0x0298fe6d hci version 0x110 quirks 0x00010010
[   10.106052] xhci-hcd xhci-hcd.0.auto: irq 296, io mem 0x04030000
[   10.112268] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   10.119134] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.126414] usb usb1: Product: xHCI Host Controller
[   10.131359] usb usb1: Manufacturer: Linux 4.14.79-gbde58ab01e xhci-hcd
[   10.137935] usb usb1: SerialNumber: xhci-hcd.0.auto
[   10.143628] hub 1-0:1.0: USB hub found
[   10.147449] hub 1-0:1.0: 1 port detected
[   10.151920] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   10.157529] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   10.165375] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[   10.172254] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   10.180603] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[   10.187466] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   10.187743] NET: Registered protocol family 15
[   10.199304] usb usb2: Product: xHCI Host Controller
[   10.204221] usb usb2: Manufacturer: Linux 4.14.79-gbde58ab01e xhci-hcd
[   10.210841] usb usb2: SerialNumber: xhci-hcd.0.auto
[   10.216495] hub 2-0:1.0: USB hub found
[   10.220380] hub 2-0:1.0: 1 port detected
[   10.402530] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   10.496713] am65-cpsw-nuss 46000000.ethernet eth0: Link is Down
[   10.505502] Initializing XFRM netlink socket
[   13.568818] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   13.577577] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
root@am65xx-evm:~#
